Husqvarna E20 - Manual (Page 20)

20
HOW TO CHOOSE YOUR PATTERN
For straight stitch select pattern “A”
with pattern selector dial (4). Adjust
the stitch length with the stitch
length dial (2). You may choose
any needle position, by turning the
stitch width dial (1).
For zigzag stitch, select pattern “B”
with pattern selector dial (4). Adjust
the stitch length (2) and stitch
width (1) according to the fabric
being used.
To obtain any of the other patterns
shown in the left row on the stitch
selection panel, select the letter
below the stitch with the pattern
selector dial. Adjust the stitch
length and the stitch width with the
control dials according to the result
desired.
To obtain any of the patterns on
the right row, turn the stitch length
dial to “S”, select the pattern
desired with pattern selector dial,
and adjust the stitch width with the
stitch width dial.
1. Stitch width dial
2. Stitch length dial
3. Stitch display
4. Pattern selector dial
5. Reverse sewing lever