Husqvarna E20 - Manual (Page 31)

31
FREE MOTION DARNING
Set the machine as illustrated.
Move the feed dog adjustment lever to right side to lower the feed
dogs. (1)
Remove the presser foot shank. (2)
Attach the darning foot to the presser foot bar. The lever (A) should
be behind the needle clamp screw (B). Press the darning foot on
fi rmly from behind with your index fi nger and tighten the screw (C).
(3)
First sew around the edge of the hole (to secure the threads).
(4) First row: Always work from left to right. Turn work by 1/4 and
oversew.
A darning hoop is recommended for easier sewing and better
results.