Harbor Freight Tools CEN-TECH 98982 - Manual (Page 5)

Page 5 SKU 98982 For technical questions, please call 1-800-444-3353.
on.
• Properly maintain and inspect to
avoid electrical shock.
• Any power cord must be properly
grounded. Ground Fault Circuit Inter-
rupter (GFCI) should also be imple-
mented – it prevents sustained elec-
trical shock.
CONTAINS SEALED LEAD
16.
BATTERY. BATTERY MUST BE
RECYCLED.
WARNING: Handling the cord on
17.
this product will expose you to lead,
a chemical known to the State of
California to cause cancer, and birth
defects or other reproductive harm.
Wash hands after handling. (Califor-
nia Health & Safety Code § 25249.5,
et seq.)
WARNING: This product contains
18.
lead, which is a chemical known to
the State of California to cause can-
cer and birth defects or other repro-
ductive harm. (California Health &
Safety Code § 25249.5, et seq.)
The warnings, precautions, and in-
19.
structions discussed in this instruction
manual cannot cover all possible con-
ditions and situations that may occur.
It must be understood by the operator
that common sense and caution are
factors which cannot be built into this
product, but must be supplied by the
operator.
SAVE THESE
InSTRuCTIOnS.
GROundInG
TO PREVEnT
ELECTRIC SHOCK
And dEATH FROM
InCORRECT GROundInG
WIRE COnnECTIOn:
Check with a qualified
electrician if you are in doubt
as to whether the outlet is
properly grounded. do not
modify the Power Cord Plug
provided with the Scale.
never remove the grounding
prong from the Plug. do not
use the if the Power Cord or
Plug is damaged. If damaged,
have it repaired by a service
facility before use. If the Plug
will not fit the outlet, have a
proper outlet installed by a
qualified electrician.
Grounded Tools: Tools with Three
Prong Plugs
Equipment marked with “Grounding 1.
Required” have a three wire cord and
three prong grounding Plug. The
Plug must be connected to a properly
grounded outlet. If the equipment
should electrically malfunction or
break down, grounding provides a
low resistance path to carry electricity
away from the user, reducing the risk