Harbor Freight Tools CEN-TECH 98982 - Manual (Page 7)

Page 7 SKU 98982 For technical questions, please call 1-800-444-3353.
Symbology
Underwriters Laboratories, Inc.
V~
Volts Alternating Current
A
Amperes
n0 xxxx/min.
No Load Revolutions per Minute
(RPM)
SPECIFICATIOnS
Electrical
Requirements
Input: 110 VAC~ / 60 Hz
Battery Type: 6 VDC Sealed Lead Acid
Power Switch: ON/Off Rocker Switch
Power Plug: 3-Prong, Grounded
Maximum
Weight
Capacity
330 Pounds (150 kilograms)
Main Functions
Auto Turn Off When Under Voltage
Count
Limit Set
Auto Zero Track
Keyboard Calibration
Overload Alarm
Control
Panel Button
Indicators
ADD, C, HOLD, FUNC, ZERO/TARE, UNIT
Additional
Features
Four Adjustable Feet & Level Indicator for
Leveling of Scale.
Built-In Rechargeable Battery.
unPACKInG
When unpacking, check to make sure
that the item is intact and undamaged. If
any parts are missing or broken, please
call Harbor Freight Tools at the number
shown on the cover of this manual as soon
as possible.
OPERATInG InSTRuCTIOnS
Read the EnTIRE IMPORTAnT
SAFETY InFORMATIOn section
at the beginning of this manual
including all text under
subheadings therein before set
up or use of this product.
TO PREVEnT
SERIOuS InjuRY
FROM ACCIdEnTAL
OPERATIOn:
Turn the Power Switch (15) to
its off position and unplug the
Power Cord (17) before
performing any inspection,
maintenance, or cleaning
procedures.
Assembly Instructions
FIGuRE A
dISPLAY
(1)
STEEL TuBE
(4)
STEEL BASE
(5)
BOLTS
(6)
Attach the Display (1) and Steel Tube
(4) to the Steel Base (5) of the Scale
using four Bolts (6). (See Figure A.)
Scale Set up
Place the Scale on a clean, dry, flat, 1.
level surface capable of supporting
the weight of the Scale and all ob-
jects to be weighed.
The work area must be free of vibra-
2.
tion, strong air currents, direct sun-
shine, and high temperature.