HP 2100 TN - Manual (Page 48)

36 Chapter 2 Printing Tasks EN
4 Place the envelopes into the tray
short-edge in, print-side up. The
stamp end must enter the printer
first.
5 Slide the width guides inward until
they lightly touch the envelope stack
without bending it. The envelopes
should be centered between the
paper guides and under the tabs on
the paper width guides.
Note
If the envelope has a flap on the short
edge, this edge must enter the printer
first.
You may experience some paper jams
when using any media with a length less
178 mm (7 in.). This may be caused by
paper that has been effected by
environmental conditions. For optimum
performance, make sure you are storing
and handling the paper correctly. Please
refer to “Printing and Paper Storage
Environment” on page 144. Using media
from another manufacturer may also
help.
4
5