HP 2100 TN - Manual (Page 60)

48 Chapter 2 Printing Tasks EN
Windows NT 4.0 PS To use an existing watermark
1. Access the printer driver.
2. From the Advanced tab, click Document Options, then
Printer Features to expand their subentries.
3. Click on each desired Watermark option (Watermark,
Watermark Font, Watermark Size, Watermark Angle,
Watermark Style, and Print Watermark) and select the
desired setting for each option.
4. Click OK.
To stop printing the watermark, click Watermark and select
“none” in the Change ‘Watermark’ Setting box.
The Windows NT 4.0 PS printer driver does not support
user-defined watermarks. If you want to create a
watermark, use the HP PCL 6 printer driver.
Windows 9x PS To use an existing watermark
1. Access the printer driver.
2. From the Device Options tab, click on each desired
Watermark option (Watermark, Watermark Font,
Watermark Size, Watermark Angle, Watermark Style,
and Print Watermark) and select the desired setting
for each option.
3. Click OK.
To stop printing the watermark, click Watermark and select
“none” in the Change ‘Watermark’ Setting box.
The Windows 9x PS printer driver does not support user-
defined watermarks. If you want to create a watermark, use
the HP PCL 6 printer driver.
Macintosh
LaserWriter 8.3 1. Select Page Setup from the File menu.
2. Select Options.
3. Click the pop-up for each desired watermark option
and select the desired setting.
4. Click OK.
To stop printing watermarks, select “None” or “Printer’s
default” from the Watermark/Overlay pop-up.
Watermarks (continued)
Printer Driver Procedure