HP 2100 TN - Manual (Page 165)

EN Appendix C Printer Memory and Expansion 153
Installing Memory
CAUTION
Static electricity can damage dual in-line
memory modules (DIMMs). When
handling DIMMs, either wear an
antistatic wrist strap or frequently touch
the surface of the DIMMs’ antistatic
package, then touch bare metal on the
printer.
If you have not already done so, print a
configuration page to find out how much
memory is installed in the printer before
adding more memory.
1 After the configuration page is
printed, turn the printer off and
disconnect the power cord.
2 Open the interface cable door by
pressing on the release tabs.
Disconnect all interface cables.
3 Open the top cover.
4 Press the release button and slide
the right side panel forward until the
alignment arrows line up.
5 Pull the panel away from the printer,
exposing the available DIMM slots.
Continued on next page
1
2
3
4
5