HP 2100 TN - Manual (Page 44)

32 Chapter 2 Printing Tasks EN
Reloading Media into Tray 2 or Optional Tray 3
1 Pull the desired tray out of the
printer.
2 Push down on the metal paper lift
plate to lock it in place.
3 Add the media and make sure it is
flat in the tray at all four corners.
Keep the media below the height
tabs on the paper length guide in
the rear of the tray.
4 Slide the tray back into the printer.
Note
Whenever you remove a tray from the
printer, always push down the metal
paper lift plate before you put it back.
The metal paper lift plate releases and
lifts the paper up when you push the tray
into the printer.
2
3
4
1