Harbor Freight Tools 46813 User Manual
Page 24
3.
To adjust the bevel of the 10" Saw Blade (part #14-I), unlock the Bevel Lock (part
#19-I). Next, move the Bevel Handle (part #5G) to the right or left until the
desired bevel of the 10" Saw Blade is shown by the Bevel Scale (part #10G).
Then, re-lock the Bevel Lock. (See Figure B, and Assy. Diagrams G, and I.)
To Adjust The Angle Of A Cut:
1.
The 10" Table Saw is capable of making miter cuts from 0 degrees to 60
degrees.
2.
The Miter Gauge (part #4A) features a Miter Scale Indicator (part #6A) on the
front side of the unit. (See Figure B, and Assy. Diagram A.)
3.
To adjust the angle of a cut, loosen the Miter Gauge Knob (part #2A). Next,
move the Miter Gauge (part #4A) to the right or left, until the desired angle of cut
is shown by the Miter Scale Indicator (part #6A). Then, retighten the Miter Gauge
Knob. (See Figure B, and Assy. Diagram A.)
Proper Placement Of Hands During The Cutting Process:
1.
Caution: NEVER pass hands directly over or under the 10" Saw Blade (part
#14-I) when cutting the workpiece. Whenever possible, use a push stick (not
provided) to push the workpiece into the 10" Saw Blade.
(See Figure B, and Assy. Diagram.)
2.
At the start of the cut, the left hand holds the workpiece firmly on the Saw Table
(part #17H) and against the Rip Fence (part #10C). The right hand, with the aid
of a push stick, pushes the workpiece toward the turning 10" Saw Blade (part
#14-I). (See Figure B, and Assy. Diagrams C, H, and I.)
3.
After the cut is under way, the right hand with the aid of a push stick, continues
pushing the workpiece forward. Just before the cut is near completion move the
left hand safely away from the workpiece and the 10" Saw Blade (part #14-I).
Then, continue pushing the workpiece into the 10"Saw Blade, with the push stick,
until the cut is complete. (See Figure B, and Assy. Diagram I.)
INSPECTION, MAINTENANCE, AND CLEANING
1.
Caution: Always disconnect the 10" Table Saw from its electrical power supply
source before performing any inspection, maintenance, or cleaning.
SKU 46813
PAGE 24