Humminbird 531906-1EN_A - Manual (Page 17)

Customize the Unit Name
Each control head is assigned a Unit Name, which is based on its model
number and serial number. The unit name is also displayed next to a source
name in the Network Source Setup dialog box so you can see where the source
is connected.
When you’re first setting up your network, you may want to change how the
unit name is displayed, so it is easier to identify each unit on the network.
Customize the Unit Name
1. Main Menu: Press the MENU key twice. Select the Network menu
tab.
2. Select Unit Name. Press the RIGHT Cursor key. The unit name is
displayed in the dialog box.
3. Use the 4-WAY Cursor Control key to select the Name field. You can
change the control head display name as follows:
Move within the Name Field: Press the RIGHT or LEFT Cursor key.
Change a Letter or Number: Press the UP and DOWN Cursor keys. All
upper and lower case letters are available (including digits 0-9 and
some punctuation characters).
Save: Use the 4-WAY Cursor Control key to choose Save, and then
press the RIGHT Cursor key.
Unit Name Dialog Box
Name Field
Use the 4-WAY Cursor
Control key to change the
unit name.
Select Save and press
the RIGHT Cursor key.
11 Configuration Overview