Humminbird 531906-1EN_A - Manual (Page 24)

Select a Temperature Source
Temperature sources can be detected from a transducer’s built-in temperature
feature or from optional-purchase temperature/speed accessories connected
to the network.
• Default: When you first set up the network, the control head will
automatically choose the locally connected temperature source to
display digital readouts on the screen.
• Temperature Tabs: The T1, T2, T3, and T4 tabs at the top of the
Network Source Setup dialog box represent the digital readout
positions on the screen. You can choose a different temperature source
for each digital readout box, so each control head can display up to four
temperature digital readouts on the display.
NOTE: There will be less than four temperature tabs displayed if there aren’t four
temperature sources connected to the network.
Temperature Readout Sources
Temperature Tabs
The Temperature Source tabs correspond with the
digital readout positions on the screen.
Available
Temperature
Sources
Press the
RIGHT or LEFT
Cursor key to
select a tab.
18 Temperature Sources