Honeywell HXMT9 / HXMT9X - Manual (Page 21)

< Figure 4 > Connecting two VCRs to the . multiplexer
7
You can connect one VCR to the multiplexer and use it for both
recording and playback. However, the can handle recording
and playback at the same time, so it is possible to connect two VCRs.
One VCR is used to record while the other is used to play back. (See
the illustrations.)
multiplexer
Connecting a Mouse
ENGLISH
Daisy- Chaining and Remote Control Connections
The can be daisy-chained to other multiplexers or controlled
by a remote keyboard. To add another multiplexer to your system,
connect the RS-485 OUT connector of the additional unit to the IN RS-
485 connector. (See Setup Menu section to set multiplexer address.)
The remote keyboard should be connected to the OUT connector on the
multiplexer.
multiplexer
The multiplexer menus can be controlled by either buttons on the front
panel or by a mouse. If you plan to use a mouse, connect it to the mini-
DIN connector labeled MOUSE.
The multiplexer is not compatible with all mouse available in the market.
Please note that users are recommended to use "Recommended
mouse" only described in the manual.
Logitech mouse (Ball mouse only)
NOTE : Compatible mouse can be added without prior notice for better
performance.