Honeywell HXMT9 / HXMT9X - Manual (Page 36)

Associated Camera Setup
< Figure 17 > Associated Camera Setup submenu.
This menu allows you to associate up to three cameras with another
when an alarm condition occurs. The main camera is displayed in the
top window with the three associated cameras shown below. Under
each of the associated camera windows is a control bar.
Goes through the cameras in reverse order.
By setting this to On, the selected camera will be associated
with the camera with the alarm condition. (If all three Associated
Cameras are set to Off, no cameras will be associated to the camera
with that camera.)
Goes through the cameras in forward order.
Saves your changes and returns to the previous menu.
• < :
• On/Off :
• > :
• Exit :
22