HP LASERJET 9000MFC - Manual (Page 23)

1 The basics 23
Loading input trays
4 Adjust the front (X) paper guide by squeezing the tab on the
guide and sliding the guide to the edge of the paper.
5 Load the remaining paper (up to 500 sheets of standard-size
paper), if desired.
6 Set the paper lever to Standard if both guides are set to the
same Standard marking, such as Letter or A4. Otherwise, set
the lever to Custom.
7 Push the tray in until it stops.
8 Repeat steps 1 through 7 to load Tray 3.
Note
If standard-size media is loaded, the graphical display shows the
dimensions. If custom-size media is loaded, note the paper size in
millimeters on the left (Y) and front (X) guides and go to “Setting the
paper size for a tray” on page 27.
4
6
7
6
ENWW