HP LASERJET 9000MFC - Manual (Page 68)

6 Output devices 68
Multifunction finisher
Loading staples
1 Open the stapler unit door.
2 Slide the stapler unit toward you.
3 Turn the large green knob until the blue dot appears in the
window of the stapler unit.
4 Turn the small green knob at the top of the stapler unit
counterclockwise until the staple car tridge moves to the left of
the stapler unit.
CAUTION The blue dot must appear in the window of the stapler unit
before you remove the staple cartridge. If you try to remove
the staple cartridge before the blue dot appears in the
window, you could damage the finisher.
1
2
4
3
ENWW