HP LASERJET 9000MFC - Manual (Page 40)

3 Walk-up digital sending 40
Sending basics
Sending a document using factory default settings
Factory default settings are:
l Color
l PDF file format (requires the recipient to have an Adobe Acrobat viewer to open and view the file)
To send a document using factory default settings:
1 Place the document face down on the glass or in the ADF. (Use the ADF for multipage documents.)
On the touch screen of the graphical display:
2 Touch Send Options. The Send Options box replaces the Copy Settings box. The Enhance and
Reduce/Enlarge buttons disappear. Those options do not apply to digital sending.
3 Touch E-mail.
4 Touch From: and then, using the displayed keyboard, enter your e-mail address.
Note Touch to delete any incorrect keystrokes.
5 Touch OK.
6 Touch To: and then enter the recipient e-mail address.
7 Touch OK.
8 Touch CC: and then enter the e-mail address of any copy recipients, if desired.
9 Touch OK.
10 Touch Subject: and then enter the subject of your e-mail.
11 Touch OK.
12 Press S TAR T .
13 Follow the instructions on the pop-up dialog box.
14 Remove the originals from the glass or the ADF output.
ENWW