Honeywell HREP4 - Manual (Page 54)

54
Installation
Figure 2-46 USER AUTHORITY Menu
Select and click to change the authority for the Manager and Users. Click APPLY after
selecting each item.
Note Any user can be deleted except the default ADMIN user. User authority is
effective only when the PASSWORD is ON in the System Management
Settings. See
Configuring System Management Settings on page 49 .
Configuring User Log Out
1. Click LOG OUT on the left side of the USER window. The LOG OUT menu appears.
Figure 2-47 LOG OUT Menu
2. Use the to configure the following settings:
Configuring the Network Settings
Select NETWORK in the Main system setup window, then click . The NETWORK setup
window opens.
AUTO LOGOUT Enables/disables AUTO LOGOUT.
DURATION Configure the length of time for the AUTO LOGOUT.