Example – HPP Enterprises P4000 SAN User Manual
Page 17
Advertising
17
Example
In the following example, six separate network links are available to a XenServer host. Of these, two
are bonded for VM LAN traffic and two for iSCSI SAN traffic. In general, the procedure is as follows:
1.
Ensure there are no VMs running on the particular XenServer host.
2.
Select the host in XenCenter and open the Network tab, as shown in Figure 7.
A best practice for the networks is to add a meaningful description to each network in the description
field.
Figure 7. Select host in XenCenter and open Network tab.
3.
Select the NICs tab and click the Create Bond button. Add the interfaces you wish to bond, as
shown in Figure 8.
Advertising