HPP Enterprises P4000 SAN - Manual (Page 26)

26
Figure 17. Naming the SR XPSP2-01
4. As shown in Figure 18, specify the target host for the SR as 1.1.1.225 (the virtual IP address of the
HP StorageWorks iSCSI SAN cluster).
Next, select Discover IQNs to list visible iSCSI storage targets in a drop-down list. Match the Target
IQN value to the IQN of volume XPSP2-01 as shown in the CMC.
Select Discover LUNs; then specify LUN 0 as the Target LUN, forcing iSCSI to be presented at LUN
0 for each unique target IQN.
Select Finish to complete the creation of the new SR.