Heat & Glo Fireplace EVEREST - Manual (Page 12)

Heat & Glo • Everest • 750-900 Rev. L • 1/06 12
Figure 7. Venting with One 90° Elbow
NOTE: If a 90 o elbow is first attached to the unit, the
maximum horizontal run is 3-feet (914mm).
NOTE: For corner installations: A 6-inch (152mm) section of straight
pipe may need to be attached to the fireplace before a 90
o elbow,
to allow the vent pipe to clear the top standoffs.
VENTING WITH ONE (1) 90° ELBOW
V H
1' MIN. (305mm) 10' MAX. (3.1m)
2' MIN. (610mm) 15' MAX. (4.65m)
4' MIN. (1.22m) 20' MAX. (6.2m)
V+H= 40’ MAX. (12.4MM) H = 20' MAX. (6.2m)
H
V
H
V