HandHeld Entertainment Document Reader 4800dr - Manual (Page 78)

6 - 30 4800dr Barcode Guide
EAN•UCC Composite Code Message Length
Scan the barcodes below to change the message length. Refer to Message Length Description (page 6-1) for additional
information. Minimum and Maximum lengths = 1-2435. Minimum Default = 1, Maximum Default = 2435.
EAN • UCC Emulation
The document reader can automatically format the output from any EAN•UCC data carrier to emulate what would be encoded in
an equivalent UCC/EAN-128 or GS1 DataBar and Composite symbol. EAN•UCC data carriers include UPC-A and UPC-E, EAN-
13 and EAN-8, ITF-14, UCC/EAN-128, and EAN•UCC GS1 DataBar and Composites. Data from 2D symbols such as Aztec
Code, Data Matrix, or QR Code, which encode a leading FNC1, also invoke EAN•UCC emulation. If UCC/EAN-128 Emulation
is selected, the AIM Symbology Identifier is reported as “]C1”. If GS1 DataBar Emulation is selected, the AIM Symbology
Identifier is reported as “]e0.” Any application that accepts EAN•UCC data can be simplified since it only needs to recognize one
data carrier type. Default = No Emulation.
TCIF Linked Code 39 (TLC39)
This code is a composite code since it has a Code 39 linear component and a MicroPDF417 stacked code component. All
barcode readers are capable of reading the Code 39 linear component. The MicroPDF417 component can only be decoded if
TLC39 On is selected. The linear component may be decoded as Code 39 even if TLC39 is off.
Postal Codes
Note: For best performance when reading a postal symbology, all other postal symbologies should be turned off. The following
postal codes can only be read by a 2D Document Reader.
Intelligent Mail Barcode
Maximum Message Length
Minimum Message Length
GS1 DataBar Emulation
128 Emulation
* EAN•UCC Emulation Off
On
* Off
* Off
On