HP PE4240N - Manual (Page 23)

Set Up 19
Connecting an S-Video Source
Use S-video cable to connect your S-video source, such as a VCR, to the TV.
To make these connections:
1 Turn off the TV and the VCR.
2 Connect one end of the S-video cable to the S-video output connector on the back of your VCR, and
connect the other end to the S-video connector at the S-Video Inputs on the back of the TV. Use
standard RCA audio patch cords to connect the audio from your VCR to the TV (if your VCR has
this capability). Be careful to keep the audio right and left channel connections correct for stereo
sound.
3 Turn on the TV and the VCR. Insert a cassette into the VCR and play it.
4 Select S-video 1 or S-video 2 (AV) as the input source for the main TV picture (so you see the image
playing from the VCR) by using the front panel buttons or the TV remote control. Refer to “Selecting
the input source” on page 26.
5 To set up the TV remote control to operate the VCR, refer to “Programming the remote control for
component control” on page 53.
Refer to your VCR owner’s manual for information about your equipment’s video output requirements.