HP PE4240N - Manual (Page 54)

50 Using the TV
Using closed caption
1 Select TV as the input source for the main TV picture by using the front panel buttons or the TV
remote control. Refer to “Selecting the input source” on page 26.
2 Display the OSD menus. Refer to “Using the On Screen Display (OSD) Controls” on page 28 for
steps to open and use the menus using the front panel buttons (or the remote control buttons).
3 Select and display Function menu.
4 Highlight C.C. Setup, and then press Setting front panel button (Enter on the remote control). The
C.C. Setup screen appears.
5 Highlight and select Caption so it turns red. Adjust the setting so it reads On, and then press Setting
front panel button (Enter on the remote control).
6 Highlight and select Mode so it turns red. Adjust the setting so it reads either Text or Caption, and
then press Setting front panel button (Enter on the remote control).
7 Highlight and select Channel so it turns red. Adjust the setting so it shows 1, and then press Setting
front panel button (Enter on the remote control).