HP PE4240N - Manual (Page 50)

46 Using the TV
Setting up V Chip
Use the first procedure to set the guidelines for parental guidance. Use the second procedure to set the
personal identification number (PIN). Use the remote control with these two procedures.
Changing the V Chip settings
1 Select TV as the input source for the main TV picture by using the front panel buttons or the TV
remote control. Refer to “Selecting the input source” on page 26.
2 Display the OSD menus. Refer to “Using the On Screen Display (OSD) Controls” on page 28 for
steps to open and use the menus using the remote control buttons.
3 Select and display Function menu.
4 Highlight V Chip Setup, and then press Enter on the remote control. The V Chip Setup screen
appears.