HP PE4240N - Manual (Page 49)

Using the TV 45
Selecting Auto Off mode
To have the TV screen turn off when there is no input signal, change the setting for Auto Off in the
Function OSD menu to On. The TV turns off the screen approximately 5 minutes after losing the input
signal.
1 Display the OSD menus. Refer to “Using the On Screen Display (OSD) Controls” on page 28 for
steps to open and use the menus using the front panel buttons (or the remote control buttons).
2 Select and display Function menu.
3 Highlight and select Auto Off so it turns red. Adjust the setting so it reads On, and then press
Setting front panel button (Enter on the remote control).
4 Exit the menu.