Hunter Fan UH68ODK - Manual (Page 18)

UH68 ODK/ODH Tent Heater
2-12
4. Remove inlet duct collar (8) and stow in PUDA
5. Disconnect Remote Cable (9) coil up and stow in PUDA
6. Disconnect power cable (10), coil up and stow in PUDA. Close PUDA
7. Remove stack (11) and stow in storage compartment (13). Secure with spring hold
down (12).*
8. Store fuel lines in storage compartment (13)
9. Fuel can adapter may be left on the fuel can. Make sure to close the air vent (17).
Heater can now be transported.
*Packing using duffle bag
1. collapse both ducts (14) together.
2. place band clamps (15) over collapsed ducts
3. place stack (11) inside ducts
4. place all inside duffle bag (16)
5. Fuel can adapter may be left on the fuel can. Make sure to close the air vent (17).