Hunter Fan UH68ODK User Manual
Page 7
UH68 ODK/ODH Tent Heater
Operators Instructions
2-1
Chapter 2
Operating Instructions
Operator Controls and Indicators
Table 2. Controls and Indicators
Key
Control or Indicator
Function
1
Main Switch
Starts and stops heater. FAN position turns fan only on
for ventilation
2
Room Thermo
Set for desired temperature. *
3
Main Power LED (green)
Indicates heater is plugged in to AC power
4
Standby LED (green)
Indicates main switch is ON but room thermo is not
calling for heat
5
Heat LED (green)
Indicates main switch is ON and combustion system is
energized
6
Fault LED (red)
Blinks a diagnostic code for corresponding fault. (see
fault codes table 3)
* Heat output is constant. Raising room thermo setting does not heat shelter faster.
1
2
3
4
5
6