HONDA IGX440 User Manual
Page 5
ENGLISH
CHOKE LEVER
CLOSE
ON
STARTER GRIP
ENGINE SWITCH
FUEL VALVE LEVER
(applicable types)
ON
CHOKE LEVER
CLOSE
CHOKE LEVER
Direction to pull
CHOKE LEVER
O
O
N
N
C
C
L
L
O
O
S
S
E
E
C
C
L
L
O
O
S
S
E
E
O
O
P
P
E
E
N
N
O
O
P
P
E
E
N
N
STANDARD TYPES
LOW PROFILE TYPES
STANDARD TYPES
LOW PROFILE TYPES
5
RECOIL STARTER TYPES:
To start a cold engine, move the choke lever to the CLOSED
position.
Some engine types use a remote-mounted choke lever. Refer to
the instructions provided by the equipment manufacturer.
Move the fuel valve lever (applicable types) to the ON position.
Some engine types use a remote-mounted engine switch. Refer
to the instructions provided by the equipment manufacturer.
Turn the engine switch to the ON position.
To restart a warm engine, leave the choke lever in the OPEN
position.
Pull the starter grip lightly until you feel resistance, then pull
briskly in the direction of the arrow as shown below. Return the
starter grip gently.
If the choke lever was moved to the CLOSED position to start the
engine, gradually move it to the OPEN position as the engine
warms up.
Do not allow the starter grip to snap back against the engine.
Return it gently to prevent damage to the starter.
Warm up the engine for 2 or 3 minutes.
2.
3.
4.
1.
5.
08/02/15 10:46:13 32Z3S600_005