HTC Dash - Manual (Page 100)

94 Section 10: Getting Connected
7. Wait for the paired device to accept the partnership.
The receiving party needs to enter the same passcode
that you specified.
8. The name of the paired device is then displayed. You
may edit and enter a new name for that device.
9. Select the check boxes of services that you want to use
from the paired device.
10. Tap Finish.
To accept a Bluetooth partnership:
1. Ensure that Bluetooth is turned on and in visible mode.
2. Tap Yes when prompted to establish a partnership with
the other device.
3. Enter a passcode (the same passcode that is entered on
the device requesting the partnership) to establish a
secure connection. The passcode must be from 1 to 16
characters long.
4. Tap Next, and then Finish. You can now exchange
information with the other device.
Sending Information Using Bluetooth
You can send information, such as contacts, calendar items, and
tasks, as well as files from your device to your computer or to
another Bluetooth-enabled device.
Note:
If your computer does not have built-in Bluetooth capability,
you need to connect and use a Bluetooth adapter or dongle
on your computer.
To send information from your device to a computer:
1. Turn on Bluetooth on your device, and make your
device visible. For information about this, see “To turn
Bluetooth on and make your device visible” on page 95.
2. You also need to set Bluetooth on your computer to
visible mode. Do one of the following: