HTC Dash User Manual
Page 114
Flicker Adjustment. When taking indoor shots, flicker
on the camera screen may be caused by inconsistencies
between the vertical scan rate of the camera display
and the flicker frequency of fluorescent lighting. To
reduce flicker, you can change the flicker adjustment
setting to the proper frequency (50Hz or 60Hz) of the
country where your device is being used.
Record with Audio (in Video mode only). Select On to
record audio with the captured video clips, or select Off
to capture video without audio.
Prefix. When Default is selected as the prefix, the file
name of each new captured file is set to “IMAGE” or
“VIDEO” followed by a sequential number, for example:
IMAGE_001.jpg. You may also choose to name files
using either the current Date or Date & Time as the
prefix.
Note:
If you set the Camera to save captured photos to a storage
card, the prefix cannot be selected. Captured photos will be
named using the convention IMAGnnnn.jpg (wherein ‘nnnn’
is the counter) which is the DCIM (Digital Camera Images)
naming standard, and will be saved to the \DCIM\100MEDIA
folder on the storage card.
Counter. To reset the file naming counter back to 1, tap
Reset.
Recording Limit (in Video mode only). Set the duration
or file size for recording video.
Template Folder (in Picture Theme mode only). By
default, templates are stored in the \My Documents\
Templates folder on the device’s Main Memory. If you
transferred some templates to a storage card (via File
Explorer), set this option to Main + Card to specify that
templates are located in both the main memory and
the storage card.
108 Section 11: Experiencing Multimedia