HP 3820 series - Manual (Page 10)

6
English
print cartridges
using print cartridges
The printer uses these print cartridges:
For more informations, see these
sections in the onscreen user’s guide:
• “replacing print cartridges”
• “maintaining print cartridges”
• “print cartridge recovery”
replacing a print cartridge
To replace a print cartridge:
1. Press the Power button to turn on the
printer.
2. Open the top cover.
The cradle moves to the center of the
cradle rod.
3. Raise the cradle latch.
4. Lift the print cartridge out of the print
cartridge cradle and discard it.
5. Remove the replacement print
cartridge from its packaging and
carefully remove the plastic tape. Hold
the print cartridge so that the copper
strip is on the bottom.
1. pull tab to remove the plastic tape
Caution! To prevent clogs, ink failure, and
bad electrical connections, do not touch
the print cartridge ink nozzles or copper
contacts, and do not remove the copper
strips.
6. Push the print cartridge firmly into the
cradle.
7. Secure the cradle latch, then close the
top cover.
8. Verify that plain paper is loaded in
the In tray, then print a calibration
page to align the print cartridges.
For instructions on aligning the print
cartridges, see “calibrating the print
cartridges” in the onscreen user’s
guide.
print
cartridge selection
number product
number
black c6615
tri-color c6578 ᕡ

 
 !