Figure 4, Figure 5, Figure 6 – Hunter Fan 34257 User Manual

Page 4: Figure 3

Advertising
background image

41786-01 08/04/2005

4

©2005 HUNTER FAN CO.

5. Lift the Upper Reservoir (marked with

the number 1) and Water Tank and place
them on top of the Lower Reservoir (marked
with the number 2) so that the two tabs
in the Lower Reservoir snap into the Upper
Reservoir. See Figure 3.

6. Take the Water Tank to a sink or tub

to fi ll with water.

7. Unscrew the Tank Cap by twisting it

counterclockwise and fi ll the Water Tank
with cool water. NEVER USE HOT WATER.
See Figure 4.

Figure 4

8. Replace the Tank Cap by screwing it

back onto the Water Tank clockwise. Se-
curely tighten the Tank Cap and make sure
it is properly sealed. See Figure 5.

Figure 5

9. Carrying the Water Tank by the two

upper handles on the top of the Tank, posi-
tion the Water Tank so that the notch in the
back fi ts over the power supply cord and the
Tank Cap in front fi ts into the cut-out area
of the Power Pack. See Figure 6.

Figure 6

Tab

Figure 3

Lower
Reservoir

Water Tank

Upper
Reservoir

Lower
Reservoir

Water Tank

Upper
Reservoir

Power
pack

Tank Cap

Cut-out
area of
power pack

Water
Tank

Tank Cap

Water
Tank

Tank Cap

41786-01/-02_rev 08.01.05.indd 4

8/4/05, 4:05:39 PM

Advertising