High End Systems DL1 - Manual (Page 22)

2-2 Setup and Configuration DL.1 User Manual
Warning: Class 1 equipment - This equipment must be earthed.
Installing a Line Cord Cap - U.K. Only
In the United Kingdom, the colours of the cores in the mains lead of this equipment
may not correspond with the colored markings identifying the terminals in the
fixture’s plug. Therefore, install a line cord cap in accordance with the following
code:
• The core which is coloured green and yellow must be connected to the plug
terminal which is marked with the letter “E,” or by the earth symbol
, or
coloured green, or green and yellow.
• The core which is coloured blue must be connected to the terminal which is
marked with the letter “N” or coloured black.
• The core which is coloured brown must be connected to the terminal which
is marked with the letter “L” or coloured red.
Warning:Class 1 equipment - This equipment must be earthed.
Vatic Fitter Heads Information - Danmark
Advarsel: Beskyttelse mod elektrisk chock.
Vigtigt!
Lederne med gul/groen isolation maa kun tilsluttes en klemme maerket
Connecting Video
The DL.1 fixture has three sets of video connectors on its rear panel, as shown in
Figure 2-1.
eller
100-120V; 50-60Hz; 6.8A
200-240V; 50-60Hz; 3.4A
S-Video VGA RGBHV
Figure 2-1 Video Connectors