High End Systems DL1 - Manual (Page 41)

DL.1 User Manual Fixture Operation 3-9
3
Caution: Do not physically connect both the RGBHV and VGA connectors.
Doing so can cause damage to the fixture and void the warranty.
To change projector input:
1. Press the Menu button to unlock the menu system or to move back up the system
to the top level menus.
2. Using the left and right arrows on the Navigation button, scroll through the top
level to SET PARAMETERS MENU and press the Enter button to select.
3. Using the left and right arrows on the Navigation button, scroll to PROJECTOR
INPUT.
4. Using the up and down arrows on the Navigation button, choose RGBHV to enable
the RGBHV or VGA inputs or choose SVIDEO to enable the S-Video input.
Projector Default?
Use this menu option to return the projector (as opposed to the DL.1 fixture) to its
factory default settings. For more information about projector factory defaults,
consult the projector manual shipped with the DL.1.
For example, if you previously set the projector input to an invalid state and you’re
not seeing output from the projector, resetting the projector to its defaults can cause
the image to redisplay.
To set the projector to its factory defaults:
1. Press the Menu button to unlock the menu system or to move back up the system
to the top level menus.
2. Using the left and right arrows on the Navigation button, scroll through the top
level to SET PARAMETERS MENU and press the Enter button to select.
3. Using the left and right arrows on the Navigation button, scroll to PROJCTR
DEFAULT?.
4. Using the up and down arrows on the Navigation button, choose YES to reset the
projector or NO to leave the projector at its current settings.
Reset Projector Hours
Use this menu option to reset the Projector hours of use to zero:
1. Press the Menu button to unlock the menu system or to move back up the system
to the top level menus.
2. Using the left and right arrows on the Navigation button, scroll through the top
level to SET PARAMETERS MENU.
3. Using the left and right arrows, on the Navigation button, scroll to
RESET PROJ HRS.
4. Using the up and down arrows on the Navigation button, select YES and hold for
5 seconds to reset the projector hours to zero.