Striking the projector lamp, Projector in by dmx, Iris version – High End Systems DL1 User Manual

Page 42

Advertising
background image

3-10 Fixture Operation

DL.1 User Manual

Striking the Projector Lamp

The menu option PROJ LAMP ON? allows the operator to strike the lamp using the
following steps:

1. Press the Menu button to unlock the menu system or to move back up the system

to the top level menus.

2. Using the left and right arrows on the Navigation button, scroll through the top

level to SET PARAMETERS MENU and press the Enter button to select.

3. Using the left and right arrows on the Navigation button, scroll to

RESET LAMP ON?.

4. Using the up and down arrows on the Navigation button, scroll to YES. Press the

Enter button. The lamp will strike after a 90 second delay.

Projector In By DMX?

By default, the menu identifies the input connection, (see “Projector Input Source” on
page 3-8). Enablin
g this option allows you to control this option using channel 11 in
the DMX protocol.

To put projector inputs under DMX control:

1. Press the Menu button to unlock the menu system or to move back up the system

to the top level menus.

2. Using the left and right arrows on the Navigation button, scroll through the top

level to SET PARAMETERS MENU and press the Enter button to select.

3. Using the left and right arrows on the Navigation button, scroll to PROJ IN BY

DMX?.

4. Using the up and down arrows on the Navigation button, choose ENABLED to

control projector input using the DMX protocol or DISABLED to control projector
input using the DL.1 menu.

Iris Version

The menu system has built-in adaptations to accomodate changes to the Iris sensor
location and interaction affect made in Version 1.0 of the fixture software.

To identify the fixture’s iris version:

1. Press the Menu button to unlock the menu system or to move back up the system

to the top level menus.

2. Using the left and right arrows on the Navigation button, scroll through the top

level to SET PARAMETERS MENU.

3. Using the left and right arrows on the Navigation button, scroll to IRIS

VERSION. The display will show an iris version of PRE V1.0 or POST V1.0.

Advertising