Humax F2-FOX - Manual (Page 40)

**
1. Setting Current Time
You can set the GMT Offset for current time.
1. Select GMT Offset using the button.
2. Press the OK or button to display GMT list. GMT is
changed by from 30 minutes to 1 hour.
3. Select your desired item and press the OK button.
Note: The current time is set automatically whenever GMT Offset
changes.
2. Power On Control
You can set the time when the product is automatically powered on.
1. Select Power On Control using the button, and press the
OK or button.
2. Select either Enable or Disable the Power On Control.
Enable Uses the Power On Control and sets the
Power On time.
Disable Not uses the Power On Control.
3. If Enable has been selected, enter the Channel No and Time
using the NUMERICAL (0~9) buttons, and press the OK
button.
3. Power Off Control
You can set the time when the product is automatically powered off.
1. Select Power Off Control using the button, and press the OK or button.
2. Select either Enable or Disable the Power Off Control using the button, and press the OK
button.
Enable Uses the Power Off Control and sets the Power Off time.
Disable Not uses the Power Off Control.
3. If Enable has been selected, enter the Time using the NUMERICAL (0~9) buttons, and press the OK
button.
Note: Once Power On/Off Control is specified, it is repeated everyday.
**
7. Setting Preferences
GB 40
**
**
**
**
**
**
**
**
**
**
**
**
**
**