Humax F2-FOX - Manual (Page 46)

**
Satellite Alternative
You can search and watch a programme by using the antenna headed for the selected satellite.
1. Select Satellite Alternative using the button, and press
the OK or button.
2. Then, you can change into one of the following options.
Disable Does not search the selected satellite.
Enable Searches the selected satellite.
Note: If there is no satellite that Satellite Alternative is set to Enable,
Channel Search is not available.
**
LNB Frequency (MHz)
You can enter LNB Frequency.
1. Select LNB Frequency using the button, and press the
OK or button.
2. Select one value from Universal ,9750,10600, 5150, 11475,
User Define using the button. If you have selected User
Define, enter LNB Frequency value directly, and press the OK
button
Note: If you have selected Universal, select 9750/10600. In this case,
the 22KHz tone value is disabled.
**
22kHz Tone
You can select whether or not to use 22KHz Tone.
1. Select 22kHz Tone using the button, and press the OK
or button.
2. Select whether or not to use 22KHz Tone using the button,
and press the OK button.
Enable Selects Enable if Dual LNB is used or 2
antennas are connected to the 22kHz tone
switch box.
Disable Selects Disable if 22kHz Tone is not used.
**
8. Installation
GB 46
**
**
**
**
**
**
**
**
**
**
**
**
**
**