Humax F2-FOX - Manual (Page 54)

**
2. SMATV Search
If your receiver uses the antenna for common use, operate SMATV Search. For SMATV Search, Channel
Search is performed by the antenna for common use regardless of the setting value in Antenna Setting.
Select SMATV Search in Other Search Menu using the button, and press the OK or button.
Frequency
1. Select Frequency using the button, and press the OK
or button.
2. Enter the down converted frequency through common LNB. You
can enter the frequency between 950 and 2150 MHz.
**
Polarisation
1. Select Polarisation using the button, and press the OK
or button.
2. Select one from Disable/Auto/Horizontal/Vertical and press the
OK button.
Note: Horizontal outputs 18V, and Vertical outputs 13V through LNB
line. Select Disable when LNB Power is not necessary.
**
Symbol Rate
1. Select Symbol Rate using the button, and press the OK
or button.
2. Select the symbol rate of the transponder.
If the rate does not exist in the List, select User Define and enter
the value directly.
**
8. Installation
GB 54
**
**
**
**
**
**
**
**
**
**
**
**
**
**