Humax F2-FOX - Manual (Page 50)

**
8.3 Manual Search
**
You can search channels of the selected satellites by transponders if you know the Transponder information.
1. Satellite
Selects a satellite to search from the satellites set in Antenna setting.
1. Select Satellite using the button, and press the OK or
button.
2. Select one of the Satellite names to search channel using the
button, press the OK button.
Note: If the satellite scheduled to search channel is not exist
in the Satellite list, move to Antenna Setting menu, set
Antenna for the Satellite, and then try again.
2. TP
Sets transponder value for the satellite
1. Select TP using the button and press the OK or
button.
2. Select one value from the TP value using the button, and
press the OK button.
3. If you cannot find your desired Transponder information form the
Transponder List, select User Define, and press the OK
button to change the Transponder information as follows.
**
• Enter Transponder frequency using the NUMERICAL (0~9)
buttons.
• Select Polarization and press the OK or button to
select one option among Auto/Horizontal/Vertical.
Note: Horizontal outputs 18V, and Vertical outputs 13V
through LNB line.
**
8. Installation
GB 50
**
**
**
**
**
**
**
**
**
**
**
**
**
**