HP 2570 - Manual (Page 32)

4 Connect to a network
This chapter describes how to connect your HP All-in-One to a network, view and
manage the network settings, and troubleshoot problems with the network connections.
If you want to: See this section:
Connect to a wired (Ethernet) network. Wired network setup
Install the HP All-in-One software for
use in a networked environment. Install the software for a network
connection
Add connections to more computers on
the network. Connect to additional computers on a
network
Change the HP All-in-One from a USB
connection to a network connection.
Note Use the instructions in this
section if you first installed your HP All-
in-One with a USB connection, and you
now want to change to wired (Ethernet)
network connection.
Change the HP All-in-One from a USB
connection to a network connection
View or change the network settings. Manage your network settings
Find troubleshooting information. Network troubleshooting
For definitions of networking terms, see the Network Glossary in the onscreen
HP Image Zone Help that came with your HP All-in-One. For information on using the
onscreen HP Image Zone Help , see Use the onscreen Help .
Wired network setup
Use this section to connect your HP All-in-One to an Ethernet router, switch, or
wireless router using an Ethernet cable. This is known as a wired or Ethernet network.
User Guide 29
Network setup