HP 2103R-CSDI - Manual (Page 11)

Conventions 11
“Syntax” vs. “Command” When the word “syntax” is used in this guide, it indicates
that the general form of a command syntax is provided.
You must evaluate the syntax and supply the appropriate
port, path, value, address, or string. For example:
Enable RIPIP by using the following syntax:
SETDefault !<port> -RIPIP CONTrol =
Listen
In this example, you must supply a port number for
!<port>.
When the word “command” is used in this guide, it
indicates that all variables in the command have been
supplied and you can enter the command as shown in
text. For example:
Remove the IP address by entering the following
command:
SETDefault !0 -IP NETaddr = 0.0.0.0
For consistency and clarity, the full-form syntax (upper- and
lowercase letters) is provided. However, you can enter the
abbreviated form of a command by typing only the uppercase
portion and supplying the appropriate port, path, address,
value, and so on. You can enter the command in either upper-
or lowercase letters at the prompt.
Text represented as
screen display
This typeface is used to represent displays that
appear on your terminal screen. For example:
NetLogin:
Text represented as
commands
This typeface is used to represent commands that
you enter. For example:
SETDefault !0 -IP NETaddr = 0.0.0.0
Keys When specific keys are referred to in the text, they are
called out by their labels, such as “the Return key” or “the
Escape key,” or they may be shown as [Return] or [Esc].
If two or more keys are to be pressed simultaneously, the
keys are linked with a plus sign (+). For example:
Press [Ctrl]+[Alt]+[Del].
Italics Italics are used to denote new terms or emphasis .
Table 3 Text Conventions (continued)
Convention Description