HP 2103R-CSDI - Manual (Page 59)

Showing Module Configuration and Status 4-7
No_Verbose is the default option for the SHOW PORT command. Use the
No_Verbose option to display summary information for the carrier ports. The
following command displays summary information for port 1 on an Edge
Router module installed in slot 1 of an ONcore hub:
ONcore> show port 1.1
Port Display for Module 6102M-SDEK:
Port Mode Status Network General Information
---- ---- ------ -------- -------------------
01.01 LOGICAL OKAY ETHERNET_4 2103R-CSDI