HP PSC-500 - Manual (Page 15)

HP PSC 500 Basic Operations Guide 3-1
Printing 3
This chapter describes the printing functions of your HP PSC 500.
Using your HP PSC 500, you can print on many sizes and types of paper, such
as letter-, A4-, and legal-sized paper. You can also print on envelopes,
transparency film, labels, cards, iron-on transfer sheets, banner paper,
greeting card stock, photo paper, and even custom-sized letterhead or
stationery.
For more information about printing on these types of paper, see Chapter 2,
“All About Paper,” in this guide.
To print special creative photo projects, refer to Chapter 4, “Scanning,” in this
guide.
Start Printing
1 If it is not already on, turn on the HP PSC 500 by pressing the white
button located on the left side of the unit’s front panel.
NOTE The scanner light remains on for approximately 12 hours after you turn on the HP PSC
500 or use it. This keeps the bulb warm for optimal performance. The light uses very
little power. After 12 hours, the HP PSC 500 turns off the scanner bulb to save energy
and displays a “Power Save On” message.
2 Load paper into the bottom (IN) tray.
3 Change the print settings as necessary:
a In your program’s File menu, select Print, Print Setup, or Page
Setup.