HP PSC-500 - Manual (Page 17)

HP PSC 500 Basic Operations Guide 3-3
NOTE The settings you change here remain in effect while you are using the current
program. To make your changes permanent, make them in the Printers folder.
e When you are sure that the settings in the Print dialog box are
correct, go to your program’s File menu and select Print or OK to
start printing.
NOTE To avoid paper jams, remove papers from the OUT tray frequently. OUT tray capacity
is affected by the type of paper and the amount of ink you are using. For more
information about tray capacities, see Chapter 6, “Technical Information,” in the
HP PSC 500 Customer Care Guide.
Stop Printing
There are two ways to stop a print job.
◆ To stop a print job from the HP PSC 500, press the Cancel button on the
front panel. HP recommends that you stop a print job using this method.
◆ To stop a print job from the Printers folder, do the following:
1 On the Windows taskbar, click Start, point to Settings, then
select Printers.
2 Double-click the HP PSC 500 icon.
3 From the list, select the document you want to cancel.
4 From the Document menu, select Cancel Printing (Windows
95/98) or Cancel (Windows NT 4.0).
NOTE Most programs that were designed for Windows 95/98 use the Windows print spooler.
The above procedure will work to stop printing in these programs. If the procedure
does not work, your program may not use the spooler (for example, PowerPoint in
Microsoft Office 95 and 97). If this happens, follow the instructions for canceling
“Background Printing” in the online Help for your program.