HP PSC-500 - Manual (Page 29)

HP PSC 500 Basic Operations Guide 5-1
Copying 5
This chapter explains how to make copies and how to use the special copying
features.
How to Make Copies
1 Turn on the HP PSC 500 by pressing the white button located on the left
side of the unit’s front panel.
2 Place your original face down on the glass with the top edge along the
green border. If the original is a photo, place the top of the photo along
the green border, close to the white arrow.
3 To change the number of copies, press the minus(–) or plus(+) button
until the correct number appears on the display.
Make sure the number of copies appears on the display. If not, press
Select/Resume or Cancel until the number of copies appears.
4 If you want to change the size of the copy, refer to the section, “Using the
Reduce/Enlarge Button.” To set the paper type or change the lightness or
darkness, refer to the section, “Changing Copy Settings using the Menu
Button.”
5 Press the Copy button to make copies.