Heath Zenith 3003530 - Manual (Page 3)

-3- 598-1073-03
Use Optional
Spacer if Needed
5. Mount sensor.
Screw Mounting: Attach sensor back cover to
wall using two short screws (provided). Snap
sensor onto back cover.
Tape Mounting: Apply foam tape to the sensor
back cover. Stick sensor back cover to frame of
door in desired position. Snap sensor onto back
cover.
6. Mount magnet. Repeat step 5 to attach magnet
(and spacer if needed) to door using two screws
(provided). Note: If using spacer, use the two
long screws (provided).