Heath Zenith 3003530 - Manual (Page 4)

-- 598-1073-03
123

5678
1
2
3

5
6
7
8
Inside
Sensor
Remove screw to
open access door
Back of Chime
Tune Setting
Tune Setting (Not
used on all models)
Note: Some models might require
the use of tweezers to remove and
replace the jumpers.
Tune Settings
Your wireless chime has different selectable tunes: Ding (one note), Ding-Dong
(two note), or Westminster (eight note) (Available on selected chimes). The
factory setting is for the Ding-Dong tune (or Westminster, when available). This
tune can be changed by following the instructions below.
•
Ding (one note tune)
Sensor: Add a jumper to location 8.
•
Ding-Dong (two note tune)
Sensor: Remove jumper from location 8.
Chime: Remove jumper from location 8.
•
Westminster (Eight note tune) (Available on selected chimes)
Sensor: Remove jumper from location 8.
Chime: Add a jumper to location 8.
Note: All models have both front and back door tune capabilities. You may
purchase any ACE
® wireless push button for a second entrance.