Henny Penny OEA - Manual (Page 4)

Model OFE/OFG/OEA/OGA-341, 342
3-2. OPERATING CONTROLS-
12 BUTTON CONTROLS (Continued)
Fig.
Item Description Function
No. No.
3-2
8 Used to access the Program Modes; once in the
Program Mode, it is used to advance to the next parameter
3-2 9 Used to stop Cook Cycles and also to stop the quality
timer at the end of a Hold Mode; to use them to start Cook
0 Cycles, see Special Program Mode Section item SP-10
3-2
10 Menu Card Displays the food product associated with each product
Window selection button; the menu card strip is located behind the
decal
3-2
11 Product Select Used to stop Cook Cycles and also to stop the quality
Buttons timer at the end of a Mold Mode; to use them to start
Cook Cycles, see Special Program Mode Section item SP-10
3-2
12 Are used to manually raise or lower the basket (or baskets),
out of the shortening if unit is equipped with auto-lift; if
pressed during a Cook Cycle, the cooking time is paused
until the basket (or baskets) are lowered back into the
shortening; on units not equipped with auto-lift, these buttons
manually pause and resume a cook timer
3-4
903