Harbor Freight Tools CHICAGO 96325 - Manual (Page 4)

Page 4 SKU 96325 for technical questions, please call 1-800-444-3353.
avoid accidental starting. be sure off button (2) is depressed before plugging
in. Plugging the Vacuum in with the On Button (3) depressed, invites accidents.
do not overreach. keep proper footing and balance at all times. Proper footing
and balance enables better control of the Vacuum in unexpected situations.
use safety equipment. always wear eye protection. Dust mask, nonskid safety
shoes, hard hat, or hearing protection must be used for appropriate conditions. Al-
ways wear ANSI-approved safety goggles and a dust mask/respirator when using
or performing maintenance on this product.
use and care
do not force the vacuum. use the correct vacuum for the application at hand.
The Vacuum will do the job better and safer at the rate for which it is designed. Do
not force the Vacuum and do not use the Vacuum for a purpose for which it is not
intended.
do not use the vacuum if the on button or the off button do not function
properly. Any product that cannot be turned on or off is dangerous and must be
replaced.
disconnect the Power cord Plug from the power source before making any
adjustments, changing accessories, or storing the vacuum. Such preventive
safety measures reduce the risk of starting the Vacuum accidentally.
always un-
plug the vacuum from its electrical outlet before performing any inspection,
maintenance, or cleaning procedures.
store idle tools out of reach of children and other untrained persons. Tools
are dangerous in the hands of untrained users.
maintain the vacuum with care. Properly cleaned and maintained Vacuums
are less likely to malfunction and are easier to control. Do not use a damaged
Vacuum.
check for misalignment or binding of moving parts, breakage of parts, and
any other condition that may affect the vacuum’s operation. if damaged,
have the vacuum serviced before using. Many accidents are caused by poorly
maintained tools.
use only accessories that are recommended by the manufacturer for your
model. Accessories that may be suitable for one Vacuum may become hazardous
when used on another Vacuum.
service
vacuum service must be performed only by qualified repair personnel. Service
or maintenance performed by unqualified personnel could result in a risk of injury.
3.
4.
5.
1.
2.
3.
4.
5.
6.
7.
1.