Harley-Davidson CRUISER M0412 - Manual (Page 14)

14
M0412a-0920
24
23
22
ASSEMBLY F
Right Handlebar
Back View
Right
Handlebar
• Locate the right handlebar. The right handlebar has an
additional hole in the grip area.
• Fit the switch to the right handlebar, making sure the screw hole
in the switch aligns with the screw hole in the right handlebar.
Switch
Cover
Grip Area
Additional Hole
Switch
Peg
• Fit the peg on the right mirror through the hole in the right
handlebar and the switch.
• While holding the two parts firmly together, insert two #8 x ¾"
screws into the switch and tighten.
• Fit a mirror lens to the right mirror.
• Insert a #8 x ½" screw through the right mirror into the mirror
lens. Tighten the screw.
• Repeat this procedure to assemble the other mirror lens to the
left mirror.
Right Mirror
Mirror Lens
25
• Fit a handgrip on the end of each handlebar.
Hint: If it is difficult to slide the handgrips onto the handlebars,
moisten the inside of the handgrips with water.
Handgrip
Handgrip
Handlebars